800-868-7245

KAYAK COVER / TI CUSTOM 2015+

Hobie Part #: 72059

Hobie Kayak Cover Tandem Island 2015+

Protect your kayak or canoe with this heavy-duty Hobie Kayak Cover for the Tandem Island. This cover fits over the hull when upright or upside down. Cover fits easily over the hull (like a fitted sheet on a mattress). Straps and pull strings adjust the cover for a tight fit. Cross straps secure the cover for windy conditions and during vehicle transport. Protect your kayak or canoe from UV, weather and dirt. The cover features a the Hobie logo and a red flag at the stern end for travel.
 
- Straps and pull strings adjust for a tight fit
- Cross straps provide security during transport
- Red storage bag doubles as safety flag during transport
- Fitted for the Tandem Island
- 100% polyester covers are UV/water resistant with double layered double stitched seams
- Material: Polyester
 
UPC: 792176246220
$389.00
CONTROL ARM - UP/DOWN

Hobie Part #: 81380

Hobie Kayak Control Arm for Up/Down

Control arm for up and down function on Hobie Kayaks.

UPC: 792176882732

$18.39
LINE 5 MM, DK GRAY w/MANGO TRA

Hobie Part #: 8004381

5mm Dark Gray w/ Mango Tracer

5mm Dark Gray w/ Mango Tracer line from Hobie Cat. Used on Mirage Kayak furling units. 

- 5mm
- Gray with Mango Tracer
- Sold by the foot
 
UPC: 792176921752
$0.69
SCREW #10x3/4 OHSMS-P

8030031

$0.25
SCREW 1/4-20 X 1-1/4 FHMS-P

8032085

$0.50
NUT (WELL NUT) 10-32 x1

Hobie Part #: 8050221

Hobie Well Nut 10-32 x1

The Hobie Well Nuts ensure a secure water proof fastening system almost anywhere on your kayak. This is the easy way to put almost anything anywhere on your kayak. Have any questions please give us a call we are here to help. Mounting stuff on your kayak is a lot easier than you think with well nuts.

Ensure your kayak is water proof around bolt holes using Hobie Well Nuts. The well-nut threaded insert contains a brass nut encased by a flanged neoprene bushing. Use a conventional machine screw (not included) to tighten. Hobie Well Nuts are must-have hardware for after-market and custom kayak mounting solutions.
 
- Uses #10-32 machine screws (not included)
- Provides a water proof and secure kayak mounting solution
- For a 3/8″ hole
- Length: 1 inch
- Sold individually
 
A well nut is a type of fastener used to blindly fasten an accessory and to seal the bolt hole. It consists of a flanged neoprene bushing with a nut embedded in the non-flanged end. The bolt is passed through one of the accessories to be fastened and threaded onto the nut from the flanged end.
 
UPC: 792176005551
$1.25
WASHER #10 FNDR SS

8080731

$0.50
HANDLE - SIDE CARRY KIT

Hobie Part #: 71190031

Hobie Side Carry Handle Kit - Eclipse Dura Series

Carrying handles for Mirage Eclipse Dura Series. Two Carrying handles for sides of board. Kit includes two carry handles with screws and washers.

UPC: 792176717850

$29.99
TRIM LOK SEAL (LG TOP-MOLDED)

71305001

$4.09
TWIST-N-SEAL HATCH KIT, RECTAN

71707003

$111.00
BOOMERANG SNIPS

Hobie Part #: 72020103

Hobie Eclipse Boomerang Retractable Line

Boomerage retractable line for Hobie Eclipse boards.

UPC: 792176788089

$14.29
GEAR TRAC GTTL90 4" W/HDWR

Hobie Part #: 72020140

Hobie Kayak Gear Trac GTTL90 4in with Hardware

GearTrac GTTL90 makes your kayak not only adjustable, but fully configurable, enabling you to change your seup from one outing to the next. GearTrac gives you the ability to go from a fully rigged kayak fishing machine to a flat deck in minutes. Includes 1 track with backing plate & fasteners. The GTT90 features the innovative, patent pending, top loading design. At just over 7/8″ (22mm) wide, the GTTL90 is perfect for kayaks and enables users to insert a Mighty Bolt from the top in addition to the ends, allowing for easier access & installation of multiple accessories. Rated for medium to heavy duty use.

UPC: 792176299547

$22.00
CRADLE SET - ADV ISL <=2014 TR

Hobie Part #: 72020400

Hobie Cradle Set - Adventure Island 2010-2015

The Hobie Cradle Set for the Adventure Island kayak model years 2010-2015 keeps your boat riding smooth on your trailer or rack. The cradle is attached to the cross bars of your trailer and creates a custom fit so your boat stays secure and doesn't warp. Mounting hardware not included.
 
- Cradle fits to your trailer or vehicle rack
- Fits the Adventure Island for model years 2010-2015
- Prevents warping
- Trailer and Cross Bars not included
- Mounting hardware not included
 
UPC: 792176581062
$254.00
BATTERY - LIVEWELL

Hobie Part #: 72021001

Hobie Livewell Battery

This is the OEM replacement battery for the Hobie Kayak Live Well.
 
- Fits the Hobie Kayak Live Well
- 6 volt 10 Ah sealed gel cell battery
- Faston Tab Terminals
 
UPC: 792176193890
$45.99
EVOLVE v2 - BATTERY CHARGER

Hobie Part #: 72022132

Hobie Kayak Evolve V2 Battery Charger

Hobie Evolve V2 kayak motor battery charger.

UPC: 792176397168

$79.99
RAM U-BOLT BASE w/1.5"  BALL

72023025

$15.99
GUTSY-GUT SCOOP SCALER SILVER

Hobie Part #: 72026019

Gerber Gutsy Silver

When the tacklebox isn’t a reality, the slim Gutsy is an on-the-go solution that is ready when opportunity strikes. Designed to be efficiently stored and intuitively used, this solid state tool offers 4 essential functions to get the job done.

- Material: 5Cr13MoV
- 4 functions:
   - Scaler
   - Gutting hook
   - Bottle Opener
   - Scooper
- Bearhand Control™
- Finger jimping
- Contoured handle
- Solid state
 
Born of the desire to create a compact processing tool that offered more, Gerber gave the basic fish scaler a major overhaul. While most tools out there only focus on one area of processing a fish, the Gutsy provides four essential functions in one compact package. Easy to toss in your backpack or back pocket, the Gutsy is always ready when opportunity strikes. The scaler is ground into the metal for sharp teeth that effectively remove scales from the fish, no time wasted. The gut hook is also ground into the tool, an ultra-sharp edge that easily slides into the vent of the fish and opens the cavity. Built into the body of the tool is the scooper, an easy-to-use point that allows you to remove any remaining veins without the possible damage of a blade. And last but not least, a bottle opener is included for the celebratory beverage at the end of a long day. Not every fishing trip is planned, sometimes opportunity strikes when you least expect it. The Gutsy is slim enough to keep on hand for those “just in case” moments, and dependable enough to act as an all-in-one processing tool on the fly. Gerber tools are built to last a lifetime. To ensure optimal performance, rinse your tool with fresh water and dry thoroughly with a clean towel.
 
UPC: 792176909576
$19.99
RB CAMERA MOUNT KIT

72026205

$37.99
T- HANDLE, PADDLE

74049001

$15.29
SPRING BUTTON, PADDLE SHAFT

74076102

$3.19
XBAR AI V2 - REAR 2015-

79104101

$91.99
AKA AI V2 - LT FWD 2015-

Hobie Part #: 79503901

Adventure Island AKA 2015+ (Forward Left)

Forward left AKA bar for 2015 model year and newer Adventure Island kayaks.

- Rear right AKA bar
- Fits 2015 model year and newer Adventure Island kayaks
 
UPC: 792176109235
$91.99
MOUNT XBAR V2 - BOTTOM

Hobie Part #: 79510731

Hobie Mirage Crossbar Bottom Clamp (V2)

Crossbar bottom clamp for Hobie Mirage V2 style crossbars on Hobie kayaks.

- Bottom clamp for crossbar
- Works with V2 style crossbars (2011 and newer)
 
UPC: 792176955290
$10.19
DRUM - ISLAND MAST FURLE -2014

Hobie Part #: 79512001

Hobie Adventure Island Furler Drum

Furler drum unit for Adventure Island kayaks.

- Furling drum unit complete

UPC: 792176949329

$11.29
TRAMP AI/TI - WEB/BUCKLE ASSY

79527201

$14.99
CONNECTION PIN, AKA/XBAR

Hobie Part #: 79535001

Hobie Adventure Island AKA Connection Pin 

Connection Pin for AKA or cross bar on Adventure Island V1 kayaks.
 
- Use on V1 (early) Adventure Island kayaks
 
UPC: 792176604990
$9.19
LOCKING LEVER, MAST RECEIVER

Hobie Part #: 79551001

Adventure Island Mast Locking Lever

Mast locking lever for Hobie Adventure Island kayaks.

- Lever/Latch

UPC: 792176891413

$6.19
PEDAL RETAINER BUNJEE ASSY

Hobie Part #: 80012001

Hobie Mirage Pedal Retainer Bungee with Hook

The Hobie Mirage Pedal Retainer Bungee with Hook is a direct replacement for the retainer that comes standard on Hobie Mirage Kayaks. The Pedal Retainer Bungee, when attached to the boat and the Mirage Drive will allow you to keep the drive fins flush to the bottom of the kayak while beaching. Shock cord end sold separately.
 
- Replacement part for pedal retainer
- Keeps your Mirage Drive fins flush against the boat during transport or beaching
- Other end attaches to the Hobie shock cord end, sold separately
- Sold individually
 
UPC: 792176090731
$14.29
HOBIE DOLLY, AI/TI BEACH-TIRE

Hobie Part #: 80046200

Hobie Adventure Island / Tandem Island Kayak Cart with Beach Wheels

The Hobie Tandem Island Kayak Cart with Beach Wheels is perfect for helping you bring your Hobie Tandem Island to or from the water without needing to lift the entire boat. The Hobie Tandem Island Kayak Cart with Beach Wheels includes a hull and ama cradle that will hold your boat still while on the cart, as well as a pull handle. The beach wheels are ideal to use over soft sand or other surfaces due to the ability to deflate the tires a little bit to gain better traction while on loose surfaces. The handle makes it easier to insert or remove the cart under the boat or pull along when un-loaded. The handle also acts as a kick-stand to keep the cradle upright during loading.
 
- Designed to assist in getting the Hobie Tandem Island to and from the water
- Built in cradles keep the boat still while transporting
- Beach wheels for use over soft sand or other surfaces
- Handle and wheels are easily removable for storage
- Handle acts as a kickstand
 
UPC: 792176088684
$519.00
ADAPTER, GEAR-HEAD TRACK

Hobie Part #: 80048007

Hobie Scotty Gear Head Track Adapter

Gear-Head Track Adapter quickly slides into place and locks down your post mounted Scotty rod holders and accessories. This system allows you to quickly change rod holder positions with a simple twist. Designed to fit all kayak track systems.

UPC: 792176397489

$17.99
 
80048022
$8.99
ACORN NUT - VANTAGE

Hobie Part #: 80503701

Hobie Kayak Vantage Seat Acorn Nut

Acorn nut for Hobie Vantage kayak seat.

UPC: 792176496410

$1.79
DRUM UPDATE KIT V1 TO GT

Hobie Part #: 81171002

Hobie Mirage Drive Drum Update Kit V1 to GT

The Hobie Mirage Drive Drum Upgrade Kit V1 to GT includes all the parts you need to upgrade your V1 drive into a GT drive. Replacement parts for the V1 Mirage Drive have been discontinued, if you need replacement parts, you must upgrade to a GT drive and use GT replacement parts. The easiest way to tell if you have a V1 drive is to look at the drum. If it looks like it has a guy dancing on it, it is a V1 drive; if it looks like it has ears it's a V2 drive. See the image for details. This kit will not upgrade the sprocket and masts to be able to use V2 fins. Your V1 fins and sprocket will work with the V2 drive.
 
- Includes all the parts to upgrade a V1 Mirage Drive drum to a Mirage Drive GT drum
- Must upgrade a V1 drum to a GT drum if you need replacement parts
- Kit only upgrades the drum and chain portion of the drive, not the fins
- V1 sprockets and fins will work with the V2 drum and chain
 
UPC: 792176865612
$129.00
FIN - MIRAGEDRIVE / COMFORT

Hobie Part #: 81190001

Hobie Mirage Drive Comfort Fin

The Hobie Standard Mirage Replacement Fin fits all Hobie Mirage Drives. Extremely durable and quite powerful.
 
- Standard sail fin for Mirage drives
 
UPC: 792176929376
$30.59
MAST - V2 ST TURBO - THREADED

Hobie Part #: 81198101

Hobie Mirage Turbo Fin Replacement Mast

The Hobie Mirage Turbo Fin Replacement Mast is the replacement mast for Hobie Mirage Drives that have turbo fins. Available in both V1 for Mirage Drives that utilize a set screw connection in the sprocket and V2 for Mirage Drives that utilize a threaded connection in the sprocket. The Hobie Mirage Turbo Fin Replacement Mast will help you get your Hobie Mirage Drive back up and running again!
 
- Mast is designed for Turbo Fins only
- V2 for threaded sprockets
- Constructed of stainless steel
- Turbo Fins not included
- Doesn't fit V1 masts that need a set screw
 
UPC: 792176372202
$23.49
PEDAL ASSY LEFT/ NO PAD MD180

Hobie Part #: 81221101

Hobie MirageDrive 180 Left Pedal Assembly / No Pad

Hobie Mirage Drive 180 left pedal/crank assembly without pad.

UPC: 792176673279

$53.99
RUDDER PIN, TWIST N' STOW 2011

81394021

$6.19
HANDLE CAP - SEAT

Hobie Part #: 81401001

Hobie Kayak Handle Cap Seat

This Hobie Seat Handle Cap Insert is a replacement Seat insert for handles for Hobie Mirage kayaks model years 2012 and newer. If you would like to upgrade your handles, choose handle part 81408101. Handle sold separately.
 
- Replacement Seat handle inserts
- Works on handles on Mirage Kayaks model years 2012 and newer
- Sold individually
- Handle sold separately
 
UPC: 792176539070
$0.99
HANDLE DECAL - DOWN

Hobie Part #: 81407001

Hobie Kayak Handle Decal Down

Replacement DOWN rudder handle decal for Hobie Mirage kayaks. The Hobie Rudder Handle Decals are replacement UP and DOWN decals for older rudder handles for Hobie Mirage kayaks model years 2009-2011. These replace the red and green decal stickers on rudder handles, but will not work if your rudder handle has the gray cap style UP and DOWN inserts.
 
- Replacement DOWN rudder handle decal
- Replaces sticker-style decals on Hobie Mirage kayaks model years 2009-2011
- Sold individually
 
UPC: 792176813842
$0.79
AKA CASTING GLUE KIT - V2 AKAS

Hobie Part #: 81412001

AKA Casting Glue Kit (2015+)

AKA Casting Glue Kit for V2 AKAs, 2015 and newer boats.

- AKA Casting Glue Kit for V2 AKA
- 2015 and newer model year boats
 
UPC: 792176597742
$9.19
PAD H-BAR

Hobie Part #: 84500106

Hobie Pro Angler H-Bar Pad

H-Bar pad for use on Hobie Pro Angler kayaks.

UPC: 792176036982

$15.29
RDR MOUNT, UNDER HULL (SCREW)

84500402

$27.59
ROD HOLDER ASSY (R) - PRO A

84500921

$48.99
BOTTOM FRAME ASSEMBLY - VANTAG

Hobie Part #: 84507531

Hobie Vantage Seat Vantage Bottom Frame Assembly

Replacement bottom frame assembly for Hobie Vantage kayak seat.

UPC: 792176489078

$132.00
VANTAGE CT SEAT - iSERIES

84507701

$479.00
VANTAGE CT SEAT

84507821

$479.00
SECONDARY STEERING HANDLE

86505401

$5.09
TRANSDUCER SUPPORT CLIP

86506201

$4.09
SAIL-TDM ISLAND V2 BAHAMA

88998507

$775.00
BATTEN 3/16 FG ROD, 7' 8-1/2"

Hobie Part #: 91041011

Adventure Island Batten (Short)

Short batten for Adventure Island sail. 

- 7 foot 8.5 inch batten for Adventure Island kayaks

UPC: 792176608622

$11.29
« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »