800-868-7245

KAYAK COVER / PA 17 CUSTOM

Hobie Part #: 72057

Hobie Kayak Cover Pro Angler 17

Protect your kayak or canoe with this heavy-duty Hobie Kayak Cover for the Pro Angler 17. These cover fits over the hull when upright or upside down. Cover fits easily over the hull (like a fitted sheet on a mattress). Straps and pull strings adjust the cover for a tight fit. Cross straps secure the cover for windy conditions and during vehicle transport. Protect your kayak or canoe from UV, weather and dirt. The cover features a the Hobie logo and a red flag at the stern end for travel.
 
- Straps and pull strings adjust for a tight fit
- Cross straps provide security during transport
- Red storage bag doubles as safety flag during transport
- Fitted for the Pro Angler 17
- 100% polyester covers are UV/water resistant with double layered double stitched seams
- Material: Polyester
 
UPC: 792176446712
$599.99
LOOP STRAP, 1/4" OD, NYLON

Hobie Part #: 81029

Hobie Kayak Loop Strap 1/4 inch OD Nylon

Loop Strap 1/4 inch OD Nylon for Hobie Kayaks.

UPC: 792176511328

$0.39
SAIL ADV V2 TURQ/PAPAYA/WHT (B

795485

$642.00
SCREW 12-24 x 1-1/4 P-OHMS SS

8031961

$0.50
BOLT 3/8-16 X 1-1/2  HEX CAP-S

Hobie Part #: 8040531

Bolt 3/8-16 x 1-1/2 Hex Cap-S

Hobie Cat Company Part.

UPC: 792176185093

$0.75
WASHER #10 FINISH

8080500

$0.10
HANDLE - LIFTING (WEB W/HOLE-

Hobie Part #: 71190000

Hobie Kayak Lifting Handle with Hole

Lifting handle with hole for Hobie kayaks.

UPC: 792176852117

$9.79
TRIM LOK SEAL (TOP MOLDED)

71301001

$3.39
GEAR BUCKET BAG

Hobie Part #: 71705001

Hobie Gear Bucket Mesh Bag

The Hobie Gear Bucket Mesh bag easily holds 3 of the Hobie Gear Buckets for easy organization and storage. A twin zipper system allows for a large opening in the side of the Hobie Gear Bucket Mesh Bag giving the ability to place the Gear Buckets inside without any hassle. Gear buckets sold separately.
 
- Holds up to 3 Gear Buckets
- Pre-pack your fishing tackle for fishing different species
- Twin zipper system allows a for a large opening to easily insert Hobie Gear buckets inside
- Gear buckets sold separately
- Length: 8 in / 20.32 cm
- Width: 9.5 in / 24.13 cm
 
UPC: 792176006381
$16.39
HD STRAP KIT

Hobie Part #: 72020099

Hobie HD Strap Kit

The Hobie HD Strap Kit provides extra security for rod holders. It provides an extra attachment point should you hook a feisty yellowfin. The strong nylon webbing is adjustable so you can get a secure fit. It can clip to an existing attachment point on your kayak or a padeye and hardware is included. See video for installation suggestions.
 
- Extra security for your rod holder
- Recommended if you are a big fish angler
- Strong nylon webbing is adjustable
- Recommended for use with the Hobie Rod Holder and the H-Rail Rod Holder
- Includes mounting hardware
 
UPC: 792176125624
$14.29
PARKNPOLE LINK 3PC 12' STAKEOU

Hobie Part #: 72020131

YakAttack ParkNPole 3 piece 12′ Stakeout / Push pole

3 piece, 12 foot long ParkNPole Link stake for use while fishing on your Hobie kayak. A floating stakeout/push pole with lots of great features at an attractive price. Lightweight and incredibly durable. Great for Kayaks. 12′ long or take out a section for 8′ length. Comes apart for easy storage.

UPC: 792176922032

$160.00
FISHING METRIC HAWG TROUGH

Hobie Part #: 72020167

Hobie Fishing Metric Hawg Through

The Hobie Fishing Metric Hawg Trough is a reliable measuring device for serious anglers. Undoubtedly, the Hawg Trough has become the standard measuring device for fisherman across the world. Its concave design cradles the fish for ease of measurement. This practical fishing tool measures fish up to 76 cm in length. Easily secure the Hobie Fishing Metric Hawg Trough with lanyard holes on either end as this device does not float.
 
- Measures fish up to 76 cm in length
- Concave board with end lip makes measuring fish easy
- Holes on either end allow for lanyard attachment
 
UPC: 792176217930
$25.00
MAST HEAD VANE, ISLAND

Hobie Part #: 72020356

Hobie Island Wind Indicator

Achieve the most performance and optimal course. Up on the mast head is the least disturbed wind flow, so the optimal location for a wind direction vane. As the wind changes direction or oscillates, you need to adjust heading and or sail trim for best performance. This wind vane is designed for all Hobie Islands when not using a spinnaker kit. Simply slips over the mast head and tightens in place with a thumb screw.

- Wind indicator vane for Hobie Island kayaks.
- Slips over mast head and tightens with simple thumb screw - Easy!
 
UPC: 792176522311
$22.49
CRADLE SET - OUTBACK

Hobie Part #: 72020407

Hobie Cradle Set - Outback

The Hobie Cradle Set for the Pro Angler Kayak and the Adventure Island kayak keeps your boat riding smooth on your trailer or rack. The cradle is attached to the cross bars of your trailer and creates a custom fit so your boat stays secure and doesn't warp. Mounting hardware not included.
 
- Cradle fits to your trailer or vehicle rack
- Fits the Pro Angler or Adventure Island, choose in the drop down
- Prevents warping
- Trailer and Cross Bars not included
- Mounting hardware not included
 
UPC: 792176445425
$234.00
PUMP CONNECTOR FEMALE - LIVEWE

72021007

$8.19
EVOLVE FG SPRING, i-SERIES LEN

Hobie Part #: 72022125

Hobie Kayak Evolve Fg Spring I-Series

Fg spring for Hobie Evolve motor in length designed for inflatable series kayaks.

UPC: 792176386087

$12.99
RAM U-BOLT RAIL BASE w/ 1" BAL

72023017

$18.99
LITHIUM PRO POWER KIT 12V 10AH

Hobie Part #: 72025010

Lithium Pro Power Lowrance Ready Fish Finder Installation Kit 

This kit includes everything you need for wiring up a fish finder on any Hobie kayak with the Lowrance Ready feature. Kit includes: Nocqua 12V, 10Ah Pro Power Kit (lithium battery, charger, wiring components, heat shrink and plug caps), additional wire connectors, wire extensions, zip ties and a Hobie battery holder.

UPC: 792176015420

$130.00
PROCESSOR TAKE-A-PART SHEARS

Hobie Part #: 72026017

Gerber Processor Fishing Take-A-Part Shears

Whether on the boat or the shore, you need a tool that can do it all. The Processor Take-A-Part Shears work as a cohesive unit and as independent tools; creativity and control collide in this revolutionary design.

- Handle: Glass-reinforced nylon & TPE, flat sage + black
- Gut hook
- Built-in scaler
- Cutting shears
- Fin clipper
- Fine edge knife cutting blade
- Take-A-Part - easily clean shears + utilize tools independently
- Ergonomic handle
- HydroTread Grip™
- Lanyard hole to secure
- Rinseable sheath w/ safety choil
 
   In researching what many anglers use to clean fish, Gerber realized that it was often a pair of standard scissors that made the cut. Building upon that proven platform, Gerber added the functionality that cutting shears alone have yet to provide: the ability to scale and prep bait. The Processor is designed as the all-in-one processing tool that is easy to pack last minute, intuitive to use, and a no-brainer to clean.
   This is no ordinary pair of fish shears, operating as a cohesive unit as well as independent tools, the Processor bundles a multitude of tasks into one package. The gut hook feature makes easy work of opening up the catch for further cleaning and de-gutting, and a ground-in scaler is sturdy enough to expedite scale removal. Unique to the Processor is an exposed fine edge blade, so you can move on to prepping bait or other tasks with no time wasted. The standard scissor function is optimized to include a fin clipper feature.
   Reducing hand fatigue and increasing comfort was a focus when it came to the Processor’s handle design. It had to deliver for the cutting shears function as well as knife work, and it had to stand up to the elements it would undoubtedly face. The handle sets itself apart with an oversized shape that caters to ergonomic comfort and offers a sturdy interface when working through tough tasks. The Processor features HydroTread Grip™, it is applied strategically in raised sections for traction and to quickly wick water away when cleaning up for the day.
   Whether you are kayak fishing, bank fishing, flat fishing, or fly fishing, you need the best fishing products in your arsenal to be successful – look no further than the Processor.
   Gerber tools are built to last a lifetime. To ensure optimal performance, rinse your tool with fresh water and dry thoroughly with a clean towel.

UPC: 792176518563

$39.99
RB GUNHOLD (1)

72026203

$19.99
DECAL DOME, HCWW GOLD 1.75"

Hobie Part #: 72542001

Hobie Kayak Dome Decal HCWW Gold

Hobie Cat Worldwide gold color dome decal/sticker for Hobie Kayaks.

UPC: 792176487708

$3.99
PADDLE DRIP RING FG/ALU SHAFT

Hobie Part #: 74030002

Hobie Kayak Paddle Drip Ring

Replacement drip ring for fiber glass aluminum shaft Hobie kayak paddle.

UPC: 792176634249

$1.09
PADDLE 230 cm HOBIE FIBER SHAF

Hobie Part #: 74075001

Hobie Kayak Paddle 230cm Fiber Shaft

Hobie kayak paddle with fiber shaft. 230 cm length for average height paddlers.

- Hobie Carbon Paddle 230 cm is made of strong and lightweight Carbon Fiber.

UPC: 792176474609

$117.00
i - PADDLE HOLDER

Hobie Part #: 79052019

Hobie Inflatable Kayak Paddle Holder

Paddle holder for use on Hobie inflatable series kayaks.

UPC: 792176570653

$4.09
AKA AI V2 - LT REAR 2015-

Hobie Part #: 79503701

Hobie Adventure Island AKA V2 (Rear Left)

Hobie Adventure Island AKA V2 (Rear Left). 2015 and newer Adventure Islands.

UPC: 792176261186

$114.00
BAG-ADV ISLAND MAST/SAIL 2015+

Hobie Part #: 79510221

Adventure Island Mast Bag (2015+)

Adventure Island Mast Bag for 2015 and newer boats.

- Fits 2015 year and newer Adventure Island masts

UPC: 792176394396

$61.99
TRAMP SET AI (- 2014) - GRAY

79527011

$399.00
EDGE GUARD - ISL XBAR

Hobie Part #: 79532201

Hobie Mirage Crossbar Edge Guard

Cross bar egde guard for Hobie Mirage V2 style crossbars on Hobie kayaks.

- Edge guard for crossbar
- Works with V2 style crossbars (2011 and newer)
 
UPC: 792176313274
$7.19
SAIL ADV ISL V2 BAHAMA

79546701

$662.00
 

Hobie Part #: 80046124

Hobie Replacement Cradle for Pro Angler 17 Dolly

Replacement Cradle for Pro Angler 17 Dolly by Hobie Cat.

UPC: 792176515395

$132.00
CART C-TUG KAYAK CART

Hobie Part #: 80047201

C-Tug Kayak Cart

Built to last, the C-TUG Kayak Cart is made of non-corroding engineering polymers, with stainless steel reinforced axles, and tough puncture free rubber tires. Unlike any other cart in the paddle sport arena today the C-TUG continues to amaze sport enthusiast with its rugged appeal, incredible strength and satisfying good looks. This cart is designed for all terrains to get you paddling in places you never dreamed of. The C-TUG Kayak Cart requires no tools and assembles in seconds and also dismantles in seconds, allowing you to stow it in your canoe or kayak hatch to take to your next destination.
 
- Supports up to 300 lbs and features tough puncture free tires
- Collapses quickly to stow in a mid-sized kayak hold
- Stainless steel reinforced axles will take the weight and resist the corrosive marine environment
- Made of non-corroding engineering polymers
- Removable kickstand and tie down straps included
- Weight: 10 lb / 4.54 kg
- Capacity: 300 lb / 136.08 kg
- Material: Reinforced composite
 
UPC: 792176877363
$149.99
 

Hobie Part #: 80048020

Scotty Portable Camera Mount

The Scotty Portable Camera Mount is fully twistable, turnable, rotatable, and best of all, instantly portable. Locks down a standard camera or GoPro without needing a special adapter. Fits ALL Scotty post mount systems which means Scotty has you covered no matter what you want to mount it to. The versatile top plate also works great for mounting a compass or any other device that mounts on a flat surface.
 
- Uses the patented Scotty post mount design for quick removal and infinitely adjustable rotation
- Attaches to any standard camera or GoPro with no adapter needed
- Fits all Scotty post mount systems
- Material: Engineering Grade Nylon
 
UPC: 792176736301
$23.99
MAST, MIRAGEDRIVE, STD (UNIVER

Hobie Part #: 81160001

Hobie Mirage Drive V1 Standard Mast

The Hobie Mirage Drive V1 Standard Mast is the replacement steel mast for Hobie Mirage Drives that utilizes a set screw connection in the sprocket. The Hobie Mirage Drive V1 Standard Mast fits the Hobie standard fins that come with most Hobie kayaks as well as Hobie ST fins (not ST Turbo).
 
- Replacement Hobie mast attaches the drive fins to the drive unit
- Replacement Hobie drive masts are sold individually
- Mast is for standard and ST fins, not ST Turbo
- Mast attaches to drive with a set screw in the drive
- V1 set screw version for drives prior to ~7/2008
 
UPC: 792176367345
$12.29
MIRAGEDRIVE 180 STD

Hobie Part #: 81189001

Hobie Mirage Drive 180 - Standard Fins

The Hobie Mirage 180 with standard fins gives you hands-free propulsion in both forward and reverse. The twin underwater turbo flippers propel you with surprising speed. The new MirageDrive features Hobie's MD180 shifting technology to go from forward to reverse in a moment. The new Mirage Drive still features the popular Glide Technology so you can pedal faster, more efficiently. The pedal-drive system on the Hobie Mirage kayaks makes it a great choice for anglers, photographers and anyone who would like their hands free while in their kayak. Features Turbo Fins and neoprene foot pads and self centering pedals.
 
- Replacement drive fits all Hobie Mirage kayaks
- MD180 shifter allows you to go from forward to reverse in a moment
- Self-cleaning mechanism (resists wear from sand and other particles)
- Features new neoprene foot pads and self centering pedals
- Turbo fins
 
UPC: 792176093886
$826.00
MIRAGE ST FIN - BLU/BLACK

Hobie Part #: 81193031

Hobie Mirage ST Fin (Each) - Blue/Black

The Hobie Mirage ST Fin upgrades the fins on the Mirage Drive to increase the surface area leading to faster speeds and more efficiency. The Mirage ST Fin is smaller than the Turbo Fins but larger than the Standard Fins. The ST Fins use the existing masts.
 
- Mirage ST Fin is smaller than the Turbo Fins but larger than the Standard Fins
- ST Fins use the existing masts
- Sold individually
 
UPC: 792176389057
$35.69
CONTROL ARM, TWIST-N-STOW RDR

Hobie Part #: 81392001

Hobie Kayak Twist N Stow Rudder Control Arm

Hobie Twist-N-Stow rudder control arm replacement for Hobie kayaks.

UPC: 792176106579

$23.49
BOLT TWIST-N-STOW DRUM

Hobie Part #: 81399001

Hobie Kayak Twist N Stow Rudder Drum Bolt

Replacement rudder drum bolt for Hobie Twist-N-Stow rudder assembly.

UPC: 792176472636

$4.09
CAP - STEERING TUBE "O" RETAIN

Hobie Part #: 81405101

Hobie Kayak Steering Tube Cap

Replacement steering tube cap for Hobie kayaks.

UPC: 792176601753

$0.59
FORK, PRO ANGLER H-BAR

Hobie Part #: 84500104

Hobie Pro Angler H Bar Fork

H-Bar fork for use on Hobie Pro Angler kayaks.

UPC: 792176982494

$4.09
HOBIE H-BAR, OUTBACK

Hobie Part #: 84500119

Hobie Outback Kayak H-Bar

Designed with stand-up anglers in mind, the Hobie H-Bar accessory adds utility and options to the Hobie Outback kayaks. Hobie designed the H-Bar to provide unsurpassed stability and an optimal support platform for kayak entry, assistance standing up, or to lean against when standing. Cast even further while leaning against the super comfortable foam pad. Made from clear-coated anodized aluminum, the H-Bar is light, strong, and quiet to prevent fish from spooking. H-Rail accessories such as mounts and rod holders can be attached to the 12-sided rail. Four telescoping legs and two sizes of center bars means the H-Bar fits a wide variety of paddler sizes and kayak sizes. The H-Bar folds away in seconds by removing two pins, leaving the front hatch and cockpit area fully accessible.
 
- Light, strong and quiet; provides unsurpassed stability
- H-Rail accessories can be attached to the bar
- Adds utility and options to the Hobie Outback kayaks
- Variable height settings fit a range of paddler sizes
- Upgraded 2018 version
- Weight: 4.5 lb / 2.04 kg
- Material: Anodized aluminum
 
UPC: 792176518501
$260.00
KICKSTAND WEBBING ASSEMBLY

Hobie Part #: 84500821

Hobie Pro Angler Kickstand Webbing Assembly

Kickstand webbing assembly for use on Hobie Pro Angler kayaks.

UPC: 792176529668

$13.29
VANTAGE ST CHAIR - COMPLETE

84507501

$591.00
CHAIR FOOT MOUNT

Hobie Part #: 84507601

Hobie Vantage Seat Vantage Chair Foot Mount

Replacement chair foot mount for Hobie Vantage kayak seat.

UPC: 792176127550

$7.19
OUTER SPACER - VANTAGE

Hobie Part #: 84507791

Hobie Vantage Seat Outer Spacer

Replacement outer spacer for Hobie Vantage kayak seat.

UPC: 792176553502

$0.69
 
86505101
$6.19
LOWRANCE ADAPTER

Hobie Part #: 86506001

Hobie Lowrance Adapter

Lowrance Adapter for Hobie Pro Angler kayaks.

UPC: 792176611851

$4.09
BRACE ASSY (L)  AKA TI -22"

Hobie Part #: 88523101

Hobie Tandem Island AKA Brace Assembly (Left)
 
AKA brace for left side of Tandem Island kayak.
 
The Hobie AKA Brace Assembly is the replacement assembly for the Hobie Tandem Island kayak. The AKA brace is the support bar that connects to the boat and to the AKA for additional support.
 
- Hobie replacement AKA brace for Tandem Island
- Support connects the AKA bar to the boat
- Sold individually
 
UPC: 792176809814
$55.99
SAIL-TDM ISLAND SMOKE

88995512

$764.00
BATTEN CAP 3/8 DIA (UAI)

Hobie Part #: 88999519

Hobie Mirage Island Batten Cap 3/8''

3/8 inch batten cap for Hobie Mirage Island series kayak sails.

UPC: 792176834304

$8.19
PUMP - BRAVO ELEC w/BATTERY

494526-00

$285.00
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »